Pivot Hinges
The door turns on a single pin instead of a barrel - clean from the front, no leaves stamped across the face.
-
Center Pivot Hinges
A center pivot hinge that mortises into the top and bottom of the door — only the pivot shows. The door swings free of the frame on a single axis, so you can run a door with no visible barrel and no side clearance to the case. Same idea as the off...Regular price From $51.12Regular priceUnit price per -
Offset Pivot Hinges
A knife hinge that carries the door on a single pivot pin — top and bottom — so the only thing visible from the front is a thin brass line at the edge. No barrel, no leaves stamped across the face. The door appears to swing on nothing. This is the...Regular price From $61.00Regular priceUnit price per
Why these cost more
Solid brass vs. the flimsy stuff
| Attribute | Brusso | Stamped & cast imports |
|---|---|---|
| Material | Solid brass, machined from bar stockBrusso | Stamped sheet or cast pot metalStamped & cast imports |
| The pivot | Door turns on a single pin, no barrelBrusso | Rolled barrel or stamped leaf across the faceStamped & cast imports |
| The knuckle | Cut true, pin runs straight, no playBrusso | Rolled barrel, develops slopStamped & cast imports |
| Fit | Mortises clean, gap stays even top to bottomBrusso | Hand-fit, uneven gaps showStamped & cast imports |
| Lifetime | Outlasts the boxBrusso | Loosens, gets replacedStamped & cast imports |
The signature
A single pin, top and bottom
The door turns on one pivot pin at the top and one at the bottom - no barrel, no leaves stamped across the face. From the front, a thin brass line and a clean swing.
Start here / 3 steps
How to choose a pivot hinge
Offset or center
An offset pivot sets the door's pivot point off the edge so it swings clear of the case. A center pivot runs the axis through the door itself. Pick by how you want the door to sit and swing.
Check the swing
Pivots turn on a single pin top and bottom, so the door swings free — no stop, no chain. If you need the lid or door to hold at an angle, you want a stop hinge instead.
Mortise top and bottom
Each pivot mortises into the top and bottom of the door and the case. Lay the cut out carefully so the pin line is true and the gap stays even down the face.
Reviews / 4.8 average / 82 ratings
Worth every penny - their words, not ours
★★★★★
My most used hinge
This is by far my most used hinge.
★★★★★
They're perfect
They're perfect. Thanks Brusso for making such high quality and precise hardware!
★★★★★
Perhaps the best there is
It's Brusso, perhaps the best there is.
Documentation
The pivot hinge guide
How to lay out and mortise offset and center pivots - the measurements that matter, step by step.
Pivot hinges turn the door on a single pin rather than a knuckle and barrel, so the face stays clean. The collection includes offset and center pivots - use the guide to pick the one your door needs.
FAQ
Common questions
What's the difference between an offset and a center pivot?
An offset pivot carries the door on a pin set in from the edge, so the door swings clear of the case. A center pivot mortises into the top and bottom of the door and turns on a single axis, with no side clearance. Choose by how the door needs to clear the opening.
Do pivot hinges show from the front?
Barely. The door rides on a single pin top and bottom, so there's no barrel and no leaf stamped across the face - just a thin brass line at the edge.
Do they come with screws?
Yes. Every set ships with matching solid-brass screws sized for the leaf. Installation templates are sold separately for clean mortising.
